Відео

@@theun-personing5674 hi welcome to my channel. Yes it does. 😉

@@theovernight1915 hi welcome to my channel. Thats good and hope you like this case as I do. All the best with your build too 👍

@@DRSUTTON hi, welcome to my channel. Thank you for your feedback and I am glad you like this content. All the best with your build too 😉

hi Grzegorz ProfiStudio, welcome to my channel and I forget to mention in this video, I have to mount the font fan this way and to flip the tray. imgur.com/gallery/vHezOSS

Hi Zack Zahniser, welcome to my channel. I am having the same issue as you do. Might need to wait for them to fix their website issue.

@@KleoYan okay thank you, any timeframe on that or is it just a temporary issue?

@@zackzahniser9255 I am checking with my local distro, no response yet and I don't have direct contact with ID-Cooling. I guess have to wait to see.

Hello Pc Guru, welcome to my channel. Is just an iPhone XS with ProMovie Recorder App. 4K 60fps with iso 320, white balance 4250 and shutter speed at 80. Then compress 4k 60fps to 2k 60fps.

Hi Joshua Jackson, welcome to my channel. In easy mode. Use cursor key to highlight to your drive you want to boot and hit enter once, then press + or - to push the boot priority.

@@KleoYan I got it now. Only issue now it keeps restarting with the blue death screen saying driver verification

@@Jacksons612Gaming Hi, mind if I ask what is your system specs? Also which bios version are you at?

Hi Phedon Rojo, welcome to my channel the vrm fan on the liquid aio will be warm air. The idea is to blow and sweep off the heat from vrm heatsink even the air taken from the vrm fans are warm but it does not impact the thermal from going up.

hi Taylor Bertrim, welcome to my channel. those holes you see on the motherboard are for 115# coolers as for 12## I am not sure about it. you might want to check at the Asus reddit forum. www.reddit.com/r/ASUS

@@KleoYan nope that's great, that's all I needed to know, 1200 and 115x used the same cooler holes. Great content, thank you for your time

@@taylorbertrim7625 oh ok.. you are most welcome. all the best with your upgrade too. 😉

Hi Emily Blondell, welcome to my channel. If your Universal Serial Bus Devices under the device manager of Windows is giving you exclamation mark "!" it means that your windows did detect a device but do not have the proper driver chipset to install it. I would advise to change the USB Port and try again.

HI Craig DJ BULLER, welcome to my channel. You can only set to DC mode and depending on your board if it allows you to have a custom fan curve on your 3pin connector fans. Mine only allows me to set at a fix voltage in DC mode ... example low temperature below 40°C to run fix at 7volts , mid temperature below 75°C to run at fix 9volts and at high temperature above 75°C to fun fix at 12volts

Hi Akumu, welcome back. you will need to plug the Sata cable and the USB cable from the controller, that's all is needed to control using L-Connect 3 app.

@@KleoYan thank you!

@@akumu7140 most welcome

Hi Noobster, welcome to my channel. you are not wrong about this, but there are some sfx psu able to do so as they do have longer 8pin eps cables

@@KleoYan Yeah, perhaps if the cable is 500mm or more in length should be ok otherwise you can be stuck with the cable dangling across the motherboard

@@noobster9212 yup. That’s why is always good to observe and to calculate properly as what fit and what does not fit.

Hi Akumu, welcome to my channel. Yes I am able to use the single pack with the triple pack controller. all is needed is to use the triple pack cables and to apply on the single pack fan.

@@KleoYan thank you for the answer!

@@akumu7140 you are most welcome 😉

Hi Jelian Radoev, welcome to my channel and thank you for your feedback. Congrats on the installation too 😉

Hi kourhu senagaki, welcome to my channel. you can place 3 x 140mm fans at the bottom and still having 2 x 120mm at the rear, but be mindful that your motherboard must be installed in Low mode and not High mode for you to have 2 x 120mm fans at the rear.

@@KleoYan thank you so much! i've been looking for an answer to that question. very helpful!

@@kourhu you are most welcome. All the best with your build too. 😉

@@kourhu you are most welcome. All the best with your build too. 😉

@@kourhu you are most welcome and all the best with your build too. 😉

Hi Fantasy's Keep, welcome back. I wish I can measure that for you but I no longer having this motherboard. So sorry.

@@KleoYan No worries. Thanks.

@@fantasyskeep thank you for your kind understanding 😉

Hi Jorge A, welcome back. The radiator fan is connected directly to your motherboard fan header, you will need to either go into your motherboard bios/uefi or to use your motherboard utility application control your radiator fan speed.

Hi Peak Stone, welcome to my channel and thank you for your feedback. Good to hear that you like this chassis and all the best with your build too 👍👍👍

Hi John Cyrille Adams Ong, welcome to my channel. Yes I do as my room is always at a consistency from 30~31 degrees celcius.

Hi 이름, welcome to my channel. It will fit but your PSU will need to be SFX or at lenght of 150mm by 150mm. Also since the width of your card is 75mm, you will not be able to fit two bottom fans, not even using 15mm slim fans.

Thank you for answer. Fortunately I have SF750 PSU. But the only problem is it's height. I wonder it would not fit case or 12vhpwr cable would be bend.

@@user-wv6hn1yo7n hmm.. ok now you have a very good point.. I dont advise you to use the Auros Master 4080 Super as you only left with 5mm of space to fit the 12VHPWR cable.

Ok everything became clear. Thank you so much.

@@user-wv6hn1yo7n you are most welcome.

Hi Korban Steel, welcome to my channel. I have done a typo but if you look at the actual benchmark time stamp 09:33, it's at 4000+ RPM.

Hi achraf tchanderli braham, welcome to my channel and pardon me for the late reply. You will first need to have your Windows OS detact your Uni Hub. if it does not detect. You can't control the fan rgb or pwm. here is a guide which might aid you. ua-cam.com/video/CgvuUFeff8U/v-deo.htmlsi=whIwm5QWj6aaGOfz and as for your ROG Strix motherboard, so long there is a connection to the fan header call CPU_FAN , you will be fine or you can disable it by ignoring the detection, the warning message will be gone. you can do this in your UEFI under fan monitoring. just set CPU_FAN to ignore.

@@KleoYan hello, and thank you for your replay, I apreciate a lot. The OS detect correctly the GA 2 trinity, i plugged the fans to the pump, then i plugged the pump to CPU_Fan it worked well i can control RGB with the motherboard program, but with L connect it sais no fan products detected, i thought it's weird, i installed the 1.75 version and it seems to work better but still there is the same message no fan products detected,so i don't know if im plugging it correctly or im doing a mistake, thank you in advance ps: i have Lian Li GA II 240 trinity not infinity SL it's without the UNI fan

@@charonsybel you should plug the pump to the pump header and radiator fans to cpu_fan header

​@@KleoYan but the radiator fans in the video you plugged them into the pump right? or i take off cable N and plug the radiator fans directly to the cpu_fan header?

@@charonsybel the right way is to connect as according to Lian Li's instruction. The issue with your mobo is it has a build in function where by if no fans are connected to the CPU_FAN header or no signal after if you did plug your fans in.. you will get this prompt. in your case yes you can do that too. infact is better to control your fan directly from the motherboard (PWM) and leave only the argb to be controlled by L-Connect 3 app.

Hi Human, welcome back 😉 and thank you again for the additional info 👍👍👍

Hi ExpensiveKoala, welcome to my channel. Unfortunately nope, you can do either. It’s if a fix position or orientation.

Hi UNISTAR, welcome to my channel. I will do this as follow For Liquid AIO LE520, I will have this as one set, radiator fans will plug to CPU_FAN header of your motherboard. For the case fants which you have 2 at the front and 1 at the rear, daisy chained them with the extenstion cable provided. This is another set, plug it to CHA_FAN or SYS_FAN. as for the argb. you dont need to have a hub. just get a splitter 2 to 1 5v 3pin argb. Then connect it to your motherboard ARGB Header

@@KleoYan Yeah, it seems that's the only way. But, oddly enough, those splitter cables (the few that I can find) are almost the price of some hubs & controllers, lol. At least, 60-70%. Insane. But, THANK YOU for replying & trying to help. Had already subscribed too :)

@@_UNISTAR_ you are most welcome and all the best with your build 👍👍👍

Hi Christian L, welcome back and thank you for your valuable feedback. I am really glad you like my content. Again thank you for your kind words 👍👍👍 all the best with your build too 😉

Hi Ποσειδώνιος Βελλεροφῶν , Welcome to my channel. I am glad you like my content and all the best with your build too. 😉

Hi Nerdy Person, welcome to my channel. I am glad to of help. All the best with your build too. 😉

Hi seamusgiacomo, welcome to my channel and thank you for your feedback. I am glad you like this content. All the very best with your build too. 😉

Hi Fantasy's Keep, welcome back and thank you for your feedback. I am glad you like my content. All the best with your build too. 😉

Hi Fantasy's Keep, welcome to my channel. Thank you for your info.

Hi Michael Bobczynski, welcome to my channel and you are most welcome. All the best with your build too 😉

Hi Batuhan Durmaz, welcome to my channel and thank you for your feedback. I am glad to of help. Maybe let us know how it turns out when you have completed your build. All the very best too 😉

​@@KleoYanyo right now I am building I also bought 420mm Artic III but the brackets send me is strange different from yours, trying to figure out

I will try to screw to rad plate directly lets see

@@batuhandurmaz6872 Hmm.. maybe take some pics of your O11D EVO RGB brackets at the top to my email godzylatech@gmail.com . I see what I can find out, thanks!

@@KleoYan I sent

Hi Rith Amy, welcome to my channel. it will be more than enough to carter for your card, so long it's above 500watts PSU which is stated here www.sapphiretech.com/en/consumer/pulse-rx-590-8g-g5 the power consumption does not only come from the 8pin connectors but also the PCI-E Slot too. therefore this SFX850 watt has more than enough wattage.

Hi Nelson Lopez, welcome to my channel and I am glad you like this content. All the best with your build too. 😉

Hi Crotin, welcome to my channel. I am glad this does aid you in certain ways. All the best with your build too. 😉

Hi TroyersBeats, welcome to my channel. Thank you for your feedback and to have subscribed to my channel. All the best with your build too. 😉

Hi Brightstone, welcome to my channel. I am so sorry that I am not aware of the past Asus boards as to be honest, I only start noticing Asus boards on their 12th Gen boards. you might want to find more info of this board at Asus official website and to compare with the board you are having. rog.asus.com/sg/motherboards/rog-maximus/rog-maximus-z790-hero-model/

@@KleoYan thats ok, thank you for your response

@@BrightstoneGG you are most welcome and sorry that I am not able to help you out.

Hi Onkelzz, welcome to my channel and yes you can add the strips on both side of the fans.

Hi Mike, welcome to my channel and yup, they do have these cable. Thank you for your feedback. 👍👍👍

Hi Paul, welcome back. This case have the advantage as it has a side tray to place fans to drawn in cool air to your motherboard area which does not require high rpm fans to push air in. Unlike the AP201, the intake depends greatly at the bottom and the passive air entering the chase. Nevertheless the choice is up to you. I would grab this more modular chassis.

Hi ELGA (Gaute Eliassen), that is for you to replace or plug to the case reset button and act as a LED button where you can cycle the argb effects when your fans are plug to the hub.

@@KleoYan OK, so it has the same function as the 2-pin connector on the right side of the controller (FAN LED SW) that connects to the LED-button on the case, just that you can connect it to a different button on the case?

@@ELGAsmusic on the case itself. Besides the power switch there is another small switch. You can either use that as a reset switch or to plug the hub 2 pin to make that switch a LED swtich. Hope this will clarify things for you.

Hi Pau Homs, welcome to my channel. For the fan RPM, I just plug then directly to the montherboard Fan headers. CPU_FAN for radiator, CHA_FAN 4 for the bottom and CHA_FAN 1 for the rear. As for the ARGB, i am using the argb hub.

@@KleoYan I see, thank you for your response!

@@pauhoms ypu are most welcome.

Hi Eyp Drk, based on your case specification here www.msi.com/PC-Case/MAG-FORGE-120A-AIRFLOW/Specification?_gl=1*10grv37*_up*MQ..&gclid=Cj0KCQjwvb-zBhCmARIsAAfUI2t8mscVuipACCTkxHPQxy9XIq2XadAlXUzVTnGyWWpiua5soZXzdhwaAtoqEALw_wcB the CPU Height clearance is at 160mm and this Air Cooler is at 162mm. it will not fit so sorry to say.

@@KleoYan Thank you for your help. I think Thermalright Phantom Spirit 120 SE is suitable for my case. What are your thoughts?

@@KleoYan I would be very grateful if you could help me on this issue.

@@eypdrk895 if this is the air cooler you are getting. www.thermalright.com/product/phantom-spirit-120-se/ . It should fit as the height is 154mm tall. all the very best 😉

@@KleoYan Thank you very much for taking the time to help me. 😊

Hi FN 1, welcome to my channel. Unfortunately no as these uni fans (each of them) have an embeded chip which follows the instruction from the Hub. Other fans does not have this, therefore the effect you can't control as and when you want them to be.

@@KleoYan thank you what rgb controller would you recommend to controll all fans?

@@FN-nh7wu if you are asking for general ARGB fans. You can make use of the motherboard ARGB header which is rated 3A on most motherboard and to use your motherboard ARGB application to control them.

@@KleoYan thanks for the response i have a gigabyte mobo but it doesnt have good rgb option. So i wanted to buy a rgb controller like razer rgb Hub.... what rgb hub would u recommand?

@@FN-nh7wu i normally go for single colors which is stationary. I never like fanciful ARGBs. chroma from razer is a good hub as for myself, simple and cheap controller like the Amber 5 or 8 from Gelid will do. ua-cam.com/video/brigGor38PY/v-deo.html

Hi crazykong1967, welcome to my channel. Do pardon me. I started doing QRCode recently, so sorry about this.

@@KleoYan No worries. It seems that Asus does not provide the Q code display or the bios flashback until you spend $400+ Again, clear and concise review.👍

@@crazykong1967 oh.. I am so sorry, I misunderstood.. now I get it the Debug code... yup, it will be great if they have it on this board.

Hi Mashkur Ahmed, welcome to my channel and thank you for your feedback. All the best with your build too. 😉